An investigation go/git-repo-shallow shows a number of problems
when doing a shallow git fetch/clone. This change introduces an
environment variable REPO_ALLOW_SHALLOW. When this environment variable
is set to 1 during a repo init or repo sync all shallow git fetch
commands are replaced with partial fetch commands. Any shallow
repository needing update is unshallowed. This behavior continues until
a subsequent repo sync command is run with REPO_ALLOW_SHALLOW set to 1.
Bug: b/274340522
Change-Id: I1c3188270629359e52449788897d9d4988ebf280
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/374754
Reviewed-by: Josip Sokcevic <sokcevic@google.com>
Tested-by: Jason Chang <jasonnc@google.com>
If interrupt signal is sent to repo process while sync is running, repo
prints stack trace for each concurrent job that is currently running
with no useful information.
Instead, this change captures KeyboardInterrupt in each process and
prints one line about current project that is being processed.
Change-Id: Ieca760ed862341939396b8186ae04128d769cd56
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/357135
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
repo sync progress bar is misleading. Many bug reports mentioned that
repo is stuck at the repo that is currently displayed in the progress
bar. Repo sync actually shows what repository is the last processed.
This change makes that obvious.
Change-Id: I962bf0bc65af7ac0ed98db86e9144f07d9e1f96f
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/357134
Reviewed-by: Joanna Wang <jojwang@google.com>
Tested-by: Josip Sokcevic <sokcevic@google.com>
This can potentially show up when sync'ing projects with submodules
that are not declared in the manifest as well as the internal
'.repo/repo' project, which is likely not desirable from a user
standpoint.
Change-Id: I93d7fcd6e3fd1818357ea4537882a864dea9942c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/355920
Reviewed-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: Michael Kelly <mkelly@arista.com>
If syncing in _FetchOne fails with GitError, sync_result does not get
set. There's already a separate local variable for success; do the same
for remote_fetched instead of referring to the conditionally defined
named tuple.
This bug is originally caused by a combination of ad8aa697 "sync: only
print error.GitError, don't raise that exception." and 1eddca84 "sync:
use namedtuples for internal return values".
Change-Id: I0f9dbafb97f8268044e5a56a6f92cf29bc23ca6a
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/354176
Tested-by: Karsten Tausche <karsten@fairphone.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
Do not use a progress bar when not doing GC, and restrict activity in
that case to only repairing preciousObject state.
This also includes additional cleanup based on review comments from
previous changes.
Change-Id: I48581c9d25da358bc7ae15f40e98d55bec142331
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353514
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
REPO_AUTO_GC was introduced as a way for users to restore the previous
default behavior, since the default changed at the same time as the
option was added. As such, it should be marked as deprecated, and
removed entirely in a future release.
Change-Id: Ib73d98fbea693e7057cc4587928c225a9e4beab2
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/353734
Reviewed-by: Sam Saccone <samccone@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Mike Frysinger <vapier@google.com>
Since the same project can be checked out in multiple paths, we need to
track the "to be uploaded" projects by path, rather than project name.
Bug: crbug.com/gerrit/16260
Test: manual
Change-Id: Ic3dc81bb8acb34886baa6299e90a49c7ba372957
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/351054
Reviewed-by: Xin Li <delphij@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
If this is a project that is not using object sharing (there is only one
copy of the remote project) then clear preciousObjects.
To override this for a project, run:
git config --replace-all repo.preservePreciousObjects true
Change-Id: If3ea061c631c5ecd44ead84f68576012e2c7405c
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/350235
Reviewed-by: Jonathan Nieder <jrn@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
People rarely care about the history of the manifest repo. Add a
parameter to specify depth for the manifest.
For now, make the default behavior the same as the current behavior. At
a future date, the default will be changed to 1. People who need the
full history should begin passing --manifest-depth=0 to preserve the
behavior when the default changes.
We can't reuse the existing --depth option because that applies to
all projects we clone, not just the manifest repo.
Bug: https://crbug.com/gerrit/16193, https://crbug.com/gerrit/16358
Change-Id: I9130fed3eaed656435c778a85cfe9d04e3a4a6a0
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/349814
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
Use pre-3.9 syntax for NamedTuple, so that users do not need to have
python 3.9 or later installed.
Bug: b/255632143, crbug.com/gerrit/16355
Test: manually verified with python 3.8
Change-Id: I488d2d5267ed98d5c55c233cc789e629f1911c9d
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/349395
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Jonathan Nieder <jrn@google.com>
Replace tuple returns with namedtuples, to simplify adding new fields.
Extend the Sync_NetworkHalf return value to:
- success: True if successful (the former return value)
- remote_fetched: True if we called `git fetch`
Change-Id: If63c24c2f849523f77fa19c05bbf23a5e9a20ba9
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/344534
Reviewed-by: Mike Frysinger <vapier@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
By default there are 4 categories in the diffmanifests
api puts the diffs in to - added, removed, changed and unreachable
Example of command - repo diffmanifests 1.xml 2.xml
added - list down the projects present in second manifest but not in
first
removed - list down the projects present in first but not in
second
changed - list down the changes and the differences for each project
unreachable - when it encounters revision value in a project is incorrect
But, when there are projects present in both manifests and could not
find in local workspace where we have cloned the repo(because of
different/subset manifest xml) - this will create unhandled exception
Now we have added a 5th category called 'missing' - where in such
cases it will handle the scenario and print the log for user
Example:
added projects :
project_2 at revision e6c8a59832c05dc4b6a68cee6bc0feb832181725
removed projects :
project_1 at revision e6c8a59832c05dc4b6a68cee6bc0feb832181725
changed projects :
project_3 changed from 3bb890e1286f04e84d505e5db48e0ada89892331 to e434b3736f11537c67590fefadfe4495895e9785
missing projects :
project_4
Change-Id: I244e8389bff7e95664c29d3dcb61e22308e3a573
Signed-off-by: Shashank Devaraj <shashankkarthik@gmail.com>
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/344774
Reviewed-by: Mike Frysinger <vapier@google.com>
This is ENABLED BY DEFAULT due to data corruption potential. To disable
it, set REPO_BACKUP_OBJECTS=0 in the environment.
While the workspace will grow over time, this provides a recovery path
for an issue where objects are erroneously deleted from the workspace,
resulting in lost work. Once the root cause is determined, we will be
able to stop saving backups again.
Backups are kept in .git/objects/.repo/pack.bak
Bug: https://crbug.com/gerrit/16247
Change-Id: Ib8b5c9b4bf0dfa9e29606e0f5c881d65996b2a40
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/345114
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Tested-by: LaMont Jones <lamontjones@google.com>
Reviewed-by: Xin Li <delphij@google.com>
People rarely care about the history of the manifest repo. Change
the default to 1 to speed up initial setup. If people really want
the full history, they can pass --manifest-depth=0.
We can't reuse the existing --depth option because that applies to
all projects we clone, not just the manifest repo.
Bug: https://crbug.com/gerrit/16193
Change-Id: Ideab1712e9ffc743b9bae97903e074d7d429b134
Reviewed-on: https://gerrit-review.googlesource.com/c/git-repo/+/343435
Tested-by: Mike Frysinger <vapier@google.com>
Reviewed-by: LaMont Jones <lamontjones@google.com>
